Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012EXPLORER AWD V6-3.5LREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSUSPENSIONSUBFRAMEFRONT SUBFRAME MOUNTSERVICE AND REPAIR
2012 Ford Explorer AWD V6-3.5L
Front Subframe Mount: Service and Repair
2012 Ford Explorer AWD V6-3.5LSECTION Service and Repair
Subframe Bushings
Special Tool(s)
Removal
1. Remove the front subframe. REFER to Subframe - Front .
2. Assemble the 204-362 to the front subframe.
3. Press out the subframe bushing.
Installation
1. Assemble the 204-362 to the front subframe with the new subframe bushing.
2. Align the subframe bushing to the front subframe.
1. Align the subframe bushing so that the voids are oriented in the fore-aft position.
3. Press the new subframe bushing into the front subframe.
4. Install the front subframe. REFER to Subframe - Front .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.