Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012EXPLORER AWD V6-3.5LREPAIR AND DIAGNOSISLIGHTING AND HORNSCOURTESY LAMPSERVICE AND REPAIR
2012 Ford Explorer AWD V6-3.5L
Courtesy Lamp: Service and Repair
2012 Ford Explorer AWD V6-3.5LSECTION Service and Repair
Puddle Lamp
WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.
Exploded View
Removal
1. Release the tab to remove the puddle lamp from the mirror housing.
2. Disconnect the electrical connector and remove the puddle lamp.
Installation
1. Connect the puddle lamp electrical connector.
2. NOTE: An audible click can be heard when the puddle lamp is fully seated.
Install the puddle lamp into the mirror housing.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.