Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012ESCAPE 4WD L4-2.5LREPAIR AND DIAGNOSISBODY AND FRAMEGRILLESERVICE AND REPAIR
2012 Ford Escape 4WD L4-2.5L
Grille: Service and Repair
2012 Ford Escape 4WD L4-2.5LSECTION Service and Repair
Radiator Grille
Removal and Installation
All vehicles
1. Remove the front bumper cover.
Escape only
2. Remove the 2 radiator grille-to-fascia screws.
3. Remove the 2 radiator grille pinch nuts.
4. Release the 3 radiator grille retaining clips and remove the radiator grille from the fascia.
Mariner only
5. Push outward on the 12 radiator grille clips to release the radiator grille from the bumper cover and remove the radiator grille.
All vehicles
6. To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.