Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012ESCAPE 2WD L4-2.5L HYBRIDREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSCONTINUOUSLY VARIABLE TRANSMISSION/TRANSAXLE, CVTFLUID - CVT
2012 Ford Escape 2WD L4-2.5L Hybrid
Fluid - CVT
2012 Ford Escape 2WD L4-2.5L HybridSECTION Fluid - CVT
eCVT Transmission 4.05 L (4.28 Quarts)a b
a Transmission filled for life.
b The correct transaxle fill level is to the bottom of the fill plug, which is the upper plug.
Motor/Electronics (M/E) coolant 3.5 L (3.7 Quarts)*
*approximate dry fill capacity.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.