Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012ESCAPE 2WD L4-2.5L HYBRIDREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTECHNICAL SERVICE BULLETINSBY SYMPTOMENGINE/HYBRID CONTROLS - MIL ON/DTC P0016 SET
2012 Ford Escape 2WD L4-2.5L Hybrid
Engine/Hybrid Controls - MIL ON/DTC P0016 Set
2012 Ford Escape 2WD L4-2.5L HybridSECTION Engine/Hybrid Controls - MIL ON/DTC P0016 Set
TSB 12-5-6
05/09/12
HYBRID SERVICE ENGINE SOON LAMP AND DTC
P0016
FORD:
2011-2012 Fusion, Escape
MERCURY:
2011 Milan, Mariner
LINCOLN:
2011-2012 MKZ
ISSUE
Some 2011 Milan, Mariner, 2011-2012 Fusion,
Escape and MKZ Hybrid vehicles may exhibit the
Service Engine Soon lamp illuminated and
diagnostic trouble code (DTC) P0016
(crankshaft/camshaft position correlation).
ACTION
Reprogram the powertrain control module (PCM) to
the latest calibration using IDS release 78.04 and
higher. This new calibration is not included in the
VCM 2012.3 DVD. Calibration files may also be
obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited
Warranty Coverage And Emissions Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
120506A 2011 Mariner, Milan, 0.3 Hr.
2011-2012 Fusion, Escape
and MKZ Hybrid, : Check
DTCs And Reprogram The
PCM (Do Not Use With
Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECALEM 04
Disclaimer
05/09/12
HYBRID SERVICE ENGINE SOON LAMP AND DTC
P0016
FORD:
2011-2012 Fusion, Escape
MERCURY:
2011 Milan, Mariner
LINCOLN:
2011-2012 MKZ
ISSUE
Some 2011 Milan, Mariner, 2011-2012 Fusion,
Escape and MKZ Hybrid vehicles may exhibit the
Service Engine Soon lamp illuminated and
diagnostic trouble code (DTC) P0016
(crankshaft/camshaft position correlation).
ACTION
Reprogram the powertrain control module (PCM) to
the latest calibration using IDS release 78.04 and
higher. This new calibration is not included in the
VCM 2012.3 DVD. Calibration files may also be
obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited
Warranty Coverage And Emissions Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
OPERATION DESCRIPTION TIME
120506A 2011 Mariner, Milan, 0.3 Hr.
2011-2012 Fusion, Escape
and MKZ Hybrid, : Check
DTCs And Reprogram The
PCM (Do Not Use With
Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECALEM 04
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.