Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012EDGE FWD V6-3.7LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER ARMSERVICE AND REPAIRWIPER PIVOT ARM - FRONT
2012 Ford Edge FWD V6-3.7L
Wiper Pivot Arm - Front
2012 Ford Edge FWD V6-3.7LSECTION Wiper Pivot Arm - Front
Wiper Pivot Arm - Front
Removal and Installation
NOTE: Use a suitable 2 jaw puller to remove the wiper pivot arm.
NOTE: Before Installation, use a wire brush and clean the wiper pivot arm shaft.
1. Refer to the procedures and/or exploded views for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.
2. To adjust the windshield wiper pivot arms, refer to Wiper Blade and Pivot Arm Adjustment- Windshield .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.