SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012EDGE AWD V6-3.5LREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGSTEERING WHEELSERVICE AND REPAIRPROCEDURES
2012 Ford Edge AWD V6-3.5L

Procedures

2012 Ford Edge AWD V6-3.5LSECTION Procedures



Steering Wheel Wrap Bonding





1. NOTE: If re-adhering leather to the front side of the steering wheel only, it will not be necessary to remove the steering wheel. Steering wheel removal is necessary only when repairing loose leather on the backside of the steering wheel.

If necessary remove the steering wheel. For additional information, refer to Steering Wheel .

2. Position the loose leather out of the way.

3. Apply the specified adhesive evenly over the wheel spoke.

4. Position the loose leather back into the original position.

5. NOTE: The adhesive should be completely set after 5 minutes. Do not pull on the repair area.
Smooth the leather and tuck in for neat appearance.

- Apply pressure (for at least 30 seconds) until the leather is bonded to the wheel spoke.


6. If removed, Install the steering wheel. For additional information, refer to Steering Wheel .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.