Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Automatic Transaxle/Transmission - 4R70E/4R75E
2012 Ford E 250 V8-5.4LSECTION Automatic Transaxle/Transmission - 4R70E/4R75E
General Specifications
Assembly Weight
Line Pressure Chart
Band and Clutch Application Chart A
A = Applied
Band and Clutch Application Chart B
a HD = Hydraulically Disabled
b NE = No Effect
c H = Hold
d OR = Overrunning
e EC = Electronically Controlled
Shift Speed Chart
NOTE: Shift speed ranges are approximate for all applications. For specific applications (engine, axle ratio and application), refer to the Automatic Transmission Specification booklet. Do not exceed local speed laws.
Stall Speed
Sensor Resistance Readings
Selective Thrust Washer - No. 1 (7D014)
Forward Clutch Pack
Reverse Clutch Pack
Direct Clutch Pack
Intermediate Clutch Pack
Torque Specifications
a Refer to the procedure in Automatic Transmission/Transaxle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.