SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012E 150 V8-4.6LREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINDIFFERENTIAL ASSEMBLYSPECIFICATIONSCAPACITY SPECIFICATIONSDIFFERENTIAL SPECIFICATIONS
2012 Ford E 150 V8-4.6L

Differential Specifications

2012 Ford E 150 V8-4.6LSECTION Differential Specifications


Limited Slip Axle *, **
M60 (M248) E350 with 4.10 axle ratio 5.9 pints (2.8 L)

Dana Limited Slip Axle *, **
M60 (M248) E250/E350 5.9 pints (2.8 L)

Dana Limited Slip Axle **
M70FF (M267FF) E350 6.6 pints (3.1 L)

Dana Limited Slip Axle **
M70HD (M273HD) E450 9.0 pints (4.3 L)

Dana Conventional Axle **
M60 (M248) E350 with 4.10 axle ratio 6.2 pints (2.9 L)

Dana Conventional Axle **
M60 (M248) E150/E350 6.2 pints (2.9 L)

Dana Conventional Axle **
M70FF (M267FF) E350 6.6 pints (3.1 L)

Dana Conventional Axle **
M70HD (M273HD) E450 9.0 pints (4.3 L)

* Note: Dana limited-slip axle (M60) requires 6 oz. (177 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A.

** Note: Fill Dana rear axles to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.