Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2001FOCUS ZX3 L4-2.0L DOHC VIN 3REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIR
2001 Ford Focus ZX3 L4-2.0L DOHC VIN 3
Control Assembly: Service and Repair
2001 Ford Focus ZX3 L4-2.0L DOHC VIN 3SECTION Service and Repair
REMOVAL
CAUTION: Disconnect the battery ground lead.
1. Remove the radio/cassette player and CD player (if fitted).
2. Remove the bezel with the heater/air conditioning control panel.
3. Remove the bezel with heater/air conditioning control panel (continued).
- Pull off the seven electrical connectors (six shown).
4. Remove bezel with heater/air conditioning control panel (continued).
- Unclip the Bowden cables.
5. Remove the heater/air conditioning control panel from the bezel.
INSTALLATION
1. Refit the components in reverse order.
2. Check the operation of the heater/air conditioning.
CAUTION: Disconnect the battery ground lead.
1. Remove the radio/cassette player and CD player (if fitted).
2. Remove the bezel with the heater/air conditioning control panel.
3. Remove the bezel with heater/air conditioning control panel (continued).
- Pull off the seven electrical connectors (six shown).
4. Remove bezel with heater/air conditioning control panel (continued).
- Unclip the Bowden cables.
5. Remove the heater/air conditioning control panel from the bezel.
INSTALLATION
1. Refit the components in reverse order.
2. Check the operation of the heater/air conditioning.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.