Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSWHEELS
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Wheels
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Wheels
General
Bolt Circle 107.95 mm (4.25 inch)
Lugs 5
Offset 42 mm (1.65 inch)
Color/Code [1]
Aluminum Cast None
Steel (15 x 6) White Brown/RK
Balance Weights, Max.
Per Wheel 5.5 oz.
Per Side 3.0 oz.
Runout, Max
Radial 1.5 mm (0.06 inch)
Lateral
Aluminum 2.0 mm (0.08 inch)
Steel 2.5 mm (0.10 inch)
[1] Code stamped near valve stem.
Bolt Circle 107.95 mm (4.25 inch)
Lugs 5
Offset 42 mm (1.65 inch)
Color/Code [1]
Aluminum Cast None
Steel (15 x 6) White Brown/RK
Balance Weights, Max.
Per Wheel 5.5 oz.
Per Side 3.0 oz.
Runout, Max
Radial 1.5 mm (0.06 inch)
Lateral
Aluminum 2.0 mm (0.08 inch)
Steel 2.5 mm (0.10 inch)
[1] Code stamped near valve stem.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.