Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSUSPENSIONCONTROL ARM
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Control Arm
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Control Arm
Retaining Bolts
Front Of Vehicle
Front 77-103 Nm (57-75 ft. lbs.)
Rear 98-132 Nm (72-97 ft. lbs.)
Rear Of Vehicle (Front and Rear Arms)
To Body 68-92 Nm (50-67 ft. lbs.)
To Spindle 68-92 Nm (50-67 ft. lbs.)
Front Of Vehicle
Front 77-103 Nm (57-75 ft. lbs.)
Rear 98-132 Nm (72-97 ft. lbs.)
Rear Of Vehicle (Front and Rear Arms)
To Body 68-92 Nm (50-67 ft. lbs.)
To Spindle 68-92 Nm (50-67 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.