Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSPEEDOMETER HEAD

1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel

Speedometer Head

1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Speedometer Head

Actual Speedometer or Odometer Value Indicated Allowable Range
48 kph (30 mph) Actual Speed 44.5-55.5 kph (27.7-34.5 mph)
97 kph (60 mph) Actual Speed 92.3-103.2 kph (57.4-64.1 mph)
Odometer Measure over Actual 16 km (10 Miles) Distance 15.4-16.6 km (9.6-10.3 Miles)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.