Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSOIL PUMP
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Oil Pump
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Oil Pump
| Relief Valve Spring Tension at Length | 10.1 - 9.1 at 1.11 Pound Force At Inch (lbf @ in) |
| Relief Valve to Bore Clearance | 0.0029 - 0.0017 Inch (in) |
| Oil pump Gear Backlash | 0.008 - 0.012 Inch (in) |
| Oil Pump Gear Radial Clearance - Idler and Drive | 0.0055 - 0.002 Inch (in) |
| Oil Pump Gear End Height | 0.0055 - 0.0005 Inch (in) |
| Idler Shaft to Idler Gear Clearance | 0.0017 - 0.0005 Inch (in) |
| Driver Shaft to Housing Clearance | 0.0019 - 0.0005 Inch (in) |
| Oil Pump to Cylinder Block Bolt | 30 - 40 Foot Pound-Force (ft.lb) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.