Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE SPRING
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Valve Spring
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Valve Spring
| Compression Pressure @ Spec Length | Loaded (Without Damper) | 180 at 0.16 Pound Force At Inch (lbf @ in) |
| Unloaded (Without Damper) | 65 at 1.58 Pound Force At Inch (lbf @ in) | |
| Free Length | 1.84 Inch (in) Approximate | |
| Assembled Height | 1.58 Inch (in) | |
| Service Limit 10 Percent Force Loss at Specified Height |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.