Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBRAKES AND TRACTION CONTROLELECTRONIC BRAKE CONTROL MODULE
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Electronic Brake Control Module
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Electronic Brake Control Module
Module To Bracket Screws 12-18 Nm (108-156 inch lbs.)
Module Bracket Bolts 26-34 Nm (20-25 ft. lbs.)
Ground Strap 8-10 Nm (71-88 inch lbs.)
Insulators 12-20 Nm (106-177 inch lbs.)
Electrical Connector 4.8 Nm (42 inch lbs.)
Module Bracket Bolts 26-34 Nm (20-25 ft. lbs.)
Ground Strap 8-10 Nm (71-88 inch lbs.)
Insulators 12-20 Nm (106-177 inch lbs.)
Electrical Connector 4.8 Nm (42 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.