Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L VIN 2 FLEX FUELREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - HVACCONTROL MODULE HVACSERVICE AND REPAIR
1999 Ford Taurus V6-3.0L VIN 2 Flex Fuel
Control Module HVAC: Service and Repair
1999 Ford Taurus V6-3.0L VIN 2 Flex FuelSECTION Service and Repair
REMOVAL
1. Disengage instrument panel insulator from instrument panel reinforcement and remove from instrument panel.
2. Working from under instrument panel, disconnect electrical harness connectors from A/C blower motor speed control.
3. Disconnect vacuum harness connector from its mounting bracket.
4. Remove two screws retaining A/C blower motor speed control to A/C evaporator housing and remove A/C blower motor speed control.
5. Note location of mounting brackets on removed A/C blower motor speed control. Transfer mounting brackets from removed A/C blower motor speed control to replacement A/C blower motor speed control.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Check system for proper operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.