Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999TAURUS V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSPISTON RING
1999 Ford Taurus V6-3.0L DOHC VIN S
Piston Ring
1999 Ford Taurus V6-3.0L DOHC VIN SSECTION Piston Ring
| Side Clearance | Compression (Top) | 0.0015 - 0.0029 Inch (in) |
| Compression (Bottom) | 0.0015 - 0.0033 Inch (in) | |
| Oil Ring | Snug Fit | |
| Service Limit | 0.0039 Inch (in) | |
| Piston Ring Gap Specification 82.4 mm (3.2441 inch) diameter gauge. | Compression (Top)-Gauge Diameter | 0.0039 - 0.0098 Inch (in) |
| Compression (Bottom)-Gauge Diameter | 0.0106 - 0.0165 Inch (in) | |
| Oil Ring (Steel Rail) Gauge Diameter | 0.0059 - 0.0255 Inch (in) | |
| Compression (Top) - Service Limit | 0.0196 Inch (in) | |
| Compression (Bottom) - Service Limit | 0.0255 Inch (in) | |
| Oil Ring (Steel Rail) - Service Limit | 0.0354 Inch (in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.