Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999RANGER 4WD V6-3.0L VIN UREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSDIFFERENTIAL ASSEMBLYSYSTEM SPECIFICATIONS
1999 Ford Ranger 4WD V6-3.0L VIN U
System Specifications
1999 Ford Ranger 4WD V6-3.0L VIN USECTION System Specifications
| Front Axle | 1.7 Liter (L) |
| Standard Rear Axle | 2.4 - 2.5 Liter (L) Note: Service refill capacities are determined by filling the axle 1/4 - 9/16 inches below bottom of fill hole. |
| Traction-Lok Rear Axle | 2.2 - 2.4 Liter (L) Note: Add 4 ounces of friction modifier additive C8AZ-19B546-A for complete refill. Service refill capacities are determined by filling the axle 1/4 - 9/16 inches below bottom of fill hole. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.