Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999F 150 2WD PICKUP V6-4.2L VIN 2REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSALTERNATORSYSTEM SPECIFICATIONS
1999 Ford F 150 2WD Pickup V6-4.2L VIN 2
System Specifications
1999 Ford F 150 2WD Pickup V6-4.2L VIN 2SECTION System Specifications
Generator B+ Nut and Washer Assembly 7-9 N.m (60-81 Lb-In)
Generator Bolts 40.3-54.7 N.m (29.7-40.3 Lb-Ft)
Brush and Terminal Holder Screws 3-4 N.m (27-35 Lb-In)
Generator Brush and Terminal Holder Screws 2.8-4 N.m (25-35 Lb-In)
Generator Bolts 40.3-54.7 N.m (29.7-40.3 Lb-Ft)
Brush and Terminal Holder Screws 3-4 N.m (27-35 Lb-In)
Generator Brush and Terminal Holder Screws 2.8-4 N.m (25-35 Lb-In)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.