Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999F 150 2WD PICKUP V6-4.2L VIN 2REPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSDIFFERENTIAL ASSEMBLYFLUID - DIFFERENTIAL
1999 Ford F 150 2WD Pickup V6-4.2L VIN 2
Fluid - Differential
1999 Ford F 150 2WD Pickup V6-4.2L VIN 2SECTION Fluid - Differential
Differential Fluid Capacity
Capacity 2.6 - 2.7L
Fill no higher than 1/4 to 9/16 inch below fill plug.
For complete fill of 8.8 and 9.75 Traction-Lok axles add 4 oz. of friction modifier C8AZ-19B956-A.
Capacity 2.6 - 2.7L
Fill no higher than 1/4 to 9/16 inch below fill plug.
For complete fill of 8.8 and 9.75 Traction-Lok axles add 4 oz. of friction modifier C8AZ-19B956-A.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.