Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999EXPEDITION 4WD V8-4.6L SOHC VIN 6REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCONNECTING ROD BEARING
1999 Ford Expedition 4WD V8-4.6L SOHC VIN 6
Connecting Rod Bearing
1999 Ford Expedition 4WD V8-4.6L SOHC VIN 6SECTION Connecting Rod Bearing
| Connecting Rod Bearings | Clearance to Crankshaft Desired | 0.001-0.0027 in |
| Clearance to Crankshaft Allowable | 0.001-0.0027 in | |
| Bearing Wall Thickness (STD) | 0.096-0.0965 in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.