Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999ECONOLINE E150 1/2 TON V6-4.2L VIN 2REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTARTER MOTORTORQUE SPECIFICATIONS
1999 Ford Econoline E150 1/2 Ton V6-4.2L VIN 2
Torque Specifications
1999 Ford Econoline E150 1/2 Ton V6-4.2L VIN 2SECTION Torque Specifications
Starter Motor Bolts 22-28 Nm (16-20 Lb-Ft)
Starter Motor Ground Cable Nut 17-23 Nm (13-17 Lb-Ft)
Starter Motor/Solenoid B+ Terminal Nut 11-13 Nm (97-115 Lb-In)
Starter Motor/Solenoid Enable Terminal Nut 4-6 Nm (35-53 Lb-In)
Starter Motor/Solenoid Ground Nut 20-25 Nm (15-18 Lb-Ft)
Starter Motor/Solenoid Ground Stud 22-28 Nm (16-21 Lb-Ft)
Starter Motor/Solenoid Mounting Bolts 22-28 Nm (16-21 Lb-Ft)
Starter Motor Ground Cable Nut 17-23 Nm (13-17 Lb-Ft)
Starter Motor/Solenoid B+ Terminal Nut 11-13 Nm (97-115 Lb-In)
Starter Motor/Solenoid Enable Terminal Nut 4-6 Nm (35-53 Lb-In)
Starter Motor/Solenoid Ground Nut 20-25 Nm (15-18 Lb-Ft)
Starter Motor/Solenoid Ground Stud 22-28 Nm (16-21 Lb-Ft)
Starter Motor/Solenoid Mounting Bolts 22-28 Nm (16-21 Lb-Ft)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.