Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1999ECONOLINE E150 1/2 TON V6-4.2L VIN 2REPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BODY AND FRAMEKEYLESS ENTRY MODULEDESCRIPTION AND OPERATION
1999 Ford Econoline E150 1/2 Ton V6-4.2L VIN 2
Keyless Entry Module: Description and Operation
1999 Ford Econoline E150 1/2 Ton V6-4.2L VIN 2SECTION Description and Operation
The Remote Keyless Entry (RKE) module is located behind the B-pillar on the driver side.
The RKE module controls the following:
^ Unlocks all doors.
^ Turns on the interior lamps after either front door handle is lifted.
^ Turns on the interior lamps when using a keyless entry remote transmitter.
^ Activates and deactivates a personal security panic alarm feature that sounds the horn and flashes the parking lamps and the headlamps.
^ Activates the lock feature that sounds the horn when the lock button is pressed on the keyless entry remote transmitter twice within five seconds.
The RKE module controls the following:
^ Unlocks all doors.
^ Turns on the interior lamps after either front door handle is lifted.
^ Turns on the interior lamps when using a keyless entry remote transmitter.
^ Activates and deactivates a personal security panic alarm feature that sounds the horn and flashes the parking lamps and the headlamps.
^ Activates the lock feature that sounds the horn when the lock button is pressed on the keyless entry remote transmitter twice within five seconds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.