Front

1994 Ford Taurus V6-182 3.0L DOHC SHOSECTION Front
Absorber Mounting Bracket to Body 23-29 foot pounds
Top Mount 40-53 foot pounds
Front Wheel Knuckle 73-97 foot pounds
Front Suspension Arm to Front Wheel Knuckle 40-53 foot pounds
Front Suspension Arm to Subframe 73-97 foot pounds
Front Suspension Lower Arm Strut to Front Suspension Arm 73-97 foot pounds
Front Suspension Lower Arm Strut to Sub-Frame 73-97 foot pounds
Stabilizer Bar Bracket to Subframe 23-29 foot pounds
Stabilizer Bar Link Assembly to Front Stabilizer Bar 35-46 foot pounds
Stabilizer Bar Link Assembly to Front Spring and Shock 57-75 foot pounds
Steering Gear Nuts 85-99 foot pounds
Front Disc Brake Caliper Attachment Bolt 85 foot pounds
Front Axle Wheel Hub Retainer 170-202 foot pounds
Wheel Hub Bolt Nuts 85-105 foot pounds
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.