Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD1994TAURUS V6-182 3.0L DOHC SHOREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSTEERINGSYSTEM SPECIFICATIONS
1994 Ford Taurus V6-182 3.0L DOHC SHO
System Specifications
1994 Ford Taurus V6-182 3.0L DOHC SHOSECTION System Specifications
Bellows Clamp Screw 20-30 in lb
External Transfer Tubes 10-20 ft lb
Gear Hose Fittings 15-25 ft lb
Gear Housing Return Line 24-30 ft lb
Gear To Crossmember 85-100 ft lb
Intermediate Shaft To Steering Column 15-25 ft lb
Intermediate Shaft To Steering Gear 30-38 ft lb
Pinion Bearing Cap 40-50 ft lb
Pinion Bearing Locknut 30-40 ft lb
Pressure Line Fitting To Actuator Banjo Bolt 22-28 ft lb
Pump Pressure Line Fitting 10-15 ft lb
Tie Rod Ball Socket To Rack [03]
Tie Rod End Jam Nut 35-50 ft lb
Tie Rod End To Spindle Arm 35-47 ft lb
VAPS Actuator 20-25 ft lb
Yoke Plug Locknut 40-50 ft lb
[03] -- Tie rod retained w/pin or rivet: 55-65 ft lb. Tie rod not retained by a pin or rivet: 68-81 ft lb.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.