Vehicle Speed Sensor: Description and Operation

1994 Ford Taurus V6-182 3.0L DOHC SHOSECTION Description and Operation

Vehicle Speed Sensor (VSS):





PURPOSE
The Vehicle Speed Sensor (VSS) signal is used by the Powertrain Control Module (PCM) to determine vehicle speed.

OPERATION
The VSS produces AC signals proportional to vehicle speed. This signal is sent to the PCM and is converted into a vehicle speed value, stored in RAM memory. The PCM utilizes this value to aid in controlling torque converter lock-up, coolant fan control, vehicle speed control, air/fuel ratio and ignition timing.

Vehicle Speed Sensor Schematic:





CONSTRUCTION
The VSS is a variable reluctance sensor that generates a sine wave type waveform with a frequency that is proportional to the speed of the vehicle.

RELATED DIAGNOSTIC TROUBLE CODES

DTC 29/452 - PCM detected an error in the VSS output (continuous memory code).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.