Programming The Keyless Entry System

1994 Ford Taurus V6-182 3.0L DOHC SHOSECTION Programming The Keyless Entry System
To program a temporary access code:

^ Enter the permanent code on the keyless entry keypad. (Factory code is located on the Keyless Entry Module).
^ Press button 1/2 within 5 seconds of last digit of permanent code. (This alerts system to accept temporary code.)
^ Enter alternate five-digit code. Do not exceed 5 seconds between entering digits or between pressing the 1/2 key and entering the first digit.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.