Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINTRANSMISSION CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURESPULSE GENERATOR A
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Pulse Generator A
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Pulse Generator A
INSPECTION CONDITION CRITERION VALUE
D range, stopping state 0 - 400 RPM
D range, 3rd speed, 50 MPH 1800 - 2200 RPM
D range, 4th speed, 50 MPH 1200 - 1600 RPM
POSSIBLE CAUSE (OR REMEDY) FOR THE ABNORMALITY
- Defective pulse generator A or harness
- Defective shield of pulse generator A
- External noise invasion
- Slip of kick-down brake
D range, stopping state 0 - 400 RPM
D range, 3rd speed, 50 MPH 1800 - 2200 RPM
D range, 4th speed, 50 MPH 1200 - 1600 RPM
POSSIBLE CAUSE (OR REMEDY) FOR THE ABNORMALITY
- Defective pulse generator A or harness
- Defective shield of pulse generator A
- External noise invasion
- Slip of kick-down brake
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.