Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSSERVICE SPECIFICATIONSVALVES
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Valves
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Valves
Stem Diameter
Intake 0.2350-0.2354
Exhaust 0.2343-0.2350
Clearance
Intake
Hot 0.008
Cold 0.004
Exhaust
Hot 0.012
Cold 0.008
Face Angle 45.0-45.5°
Margin (Minimum)
Intake 0.020
Exhaust 0.039
All measurements given in inches, unless otherwise specified.
Intake 0.2350-0.2354
Exhaust 0.2343-0.2350
Clearance
Intake
Hot 0.008
Cold 0.004
Exhaust
Hot 0.012
Cold 0.008
Face Angle 45.0-45.5°
Margin (Minimum)
Intake 0.020
Exhaust 0.039
All measurements given in inches, unless otherwise specified.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.