Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSSERVICE SPECIFICATIONSOIL PUMP
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Oil Pump
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Oil Pump
Rotor Backlash 0.0071 [02]
Rotor To Body Clearance 0.0039-0.0071 [03]
Rotor Endplay 0.0016-0.0039 [01]
Relief Spring Free Length 1.835
Relief Spring Pressure, Lbs. @ Inches 13.4 @ 1.579
All measurements given in inches, unless otherwise specified.
[01] - Measured between pump cover mounting surface & end of gear using straightedge & feeler gauge.
[02] - Maximum inner & outer rotor tip clearance.
[03] - Maximum clearance between inner & outer rotors and body.
Rotor To Body Clearance 0.0039-0.0071 [03]
Rotor Endplay 0.0016-0.0039 [01]
Relief Spring Free Length 1.835
Relief Spring Pressure, Lbs. @ Inches 13.4 @ 1.579
All measurements given in inches, unless otherwise specified.
[01] - Measured between pump cover mounting surface & end of gear using straightedge & feeler gauge.
[02] - Maximum inner & outer rotor tip clearance.
[03] - Maximum clearance between inner & outer rotors and body.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.