Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSENGINESYSTEM SPECIFICATIONSFLUID CAPACITIES & COOLING SYSTEM SPECIFICATIONS
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Fluid Capacities & Cooling System Specifications
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Fluid Capacities & Cooling System Specifications
CAPACITY DATA
Engine 1.8L
Cooling Capacity, Qts.
Less A/C 6.3
With A/C 6.3
Radiator Cap Relief Pressure 13
Thermo. Opening Temp. Deg. [6]
Fuel Tank Gal. 14.5
Engine Oil Refill Qts. [2] 4
Transaxle Oil
Manual Trans. Pints. 4.8 [1]
Auto. Trans. Qts. [3] 6.9 [1]
Rear Axle Oil Pints 1.5
[1] -- Transfer 0.6 qt.
[2] -- Includes filter.
[3] -- Approximate. Make final check w/dipstick.
[6] -- Federal, 170° F -- Calif., 180° F.
Engine 1.8L
Cooling Capacity, Qts.
Less A/C 6.3
With A/C 6.3
Radiator Cap Relief Pressure 13
Thermo. Opening Temp. Deg. [6]
Fuel Tank Gal. 14.5
Engine Oil Refill Qts. [2] 4
Transaxle Oil
Manual Trans. Pints. 4.8 [1]
Auto. Trans. Qts. [3] 6.9 [1]
Rear Axle Oil Pints 1.5
[1] -- Transfer 0.6 qt.
[2] -- Includes filter.
[3] -- Approximate. Make final check w/dipstick.
[6] -- Federal, 170° F -- Calif., 180° F.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.