Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULESERVICE AND REPAIR
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Engine Control Module: Service and Repair
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Service and Repair
ECM Location:
1. Disconnect the negative battery cable.
2. Remove the glove box.
3. Disconnect the electrical connectors from the Engine Control Module (ECM).
4. Remove the screws and remove the ECM.
5. Install in reverse order.
CAUTION: Do not connect or disconnect the ECM connectors with the negative battery cable connected. A minor spark or voltage surge can damage the ECM.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.