Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSEAGLE1994SUMMIT WAGON AWD L4-1795CC 1.8L SOHCREPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSPOWER DOOR LOCK CONTROL MODULETESTING AND INSPECTION
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHC
Power Door Lock Control Module: Testing and Inspection
1994 Eagle Summit Wagon AWD L4-1795cc 1.8L SOHCSECTION Testing and Inspection
DOOR LOCK CONTROL UNIT
1. Remove the instrument under cover.
2. Remove the door lock control unit from the relay box.
3. Inspect for proper continuity with voltage applied. Refer to the chart above.
1. Remove the instrument under cover.
2. Remove the door lock control unit from the relay box.
3. Inspect for proper continuity with voltage applied. Refer to the chart above.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.