SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE2007MAGNUM SRT-8 V8-6.1L VIN 3REPAIR AND DIAGNOSISTRANSMISSION AND DRIVETRAINTRANSMISSION CONTROL SYSTEMSRELAYS AND MODULES - TRANSMISSION AND DRIVETRAINRELAYS AND MODULES - A/TCONTROL MODULEDIAGRAMSMODULE-ELECTRONIC SHIFT
2007 Dodge Magnum SRT-8 V8-6.1L VIN 3

Module-Electronic Shift

2007 Dodge Magnum SRT-8 V8-6.1L VIN 3SECTION Module-Electronic Shift



Component ID: 244
Component : MODULE-ELECTRONIC SHIFT

Connector:
Name : MODULE-ELECTRONIC SHIFT C1
Color : BLACK
# of pins : 12
Qualifier : (COLUMN NAG1)




Pin Description Circuit
1 - -
2 GROUND Z910 22BK
3 IGNITION UNLOCK-RUN-START F902 22LB
4 BRAKE SWITCH SIGNAL B29 22YL
5 CAN C BUS (+) D65 22LG/BK
6 CAN C BUS (-) D64 22GY
7 AUTOSTICK SWITCH MUX SUPPLY 22YL
8 AUTOSTICK SWITCH MUX SIGNAL 22GY
9 - -
10 SHIFT LEVER POSITION SENSOR GROUND 22BK
11 SHIFT LEVER POSITION SENSOR SIGNAL 22LB
12 SHIFT LEVER POSITION SENSOR SUPPLY 22LG/BK



Connector:
Name : MODULE-ELECTRONIC SHIFT C2
Color : BLACK
# of pins : 2
Qualifier : (COLUMN NAG1)




Pin Description Circuit
1 BTSI CONTROL K321 24BK
2 IGNITION UNLOCK-RUN-START F902 24BK



RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.