Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE2007MAGNUM SRT-8 V8-6.1L VIN 3REPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSPOWER WINDOW SWITCHSWITCH-WINDOW/DOOR LOCK-DRIVER EXPRESS
2007 Dodge Magnum SRT-8 V8-6.1L VIN 3
Switch-Window/Door Lock-Driver Express
2007 Dodge Magnum SRT-8 V8-6.1L VIN 3SECTION Switch-Window/Door Lock-Driver Express
Component ID: 594
Component : SWITCH-WINDOW/DOOR LOCK-DRIVER EXPRESS
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER EXPRESS C1
Color : LT. GRAY
# of pins : 8
Qualifier : (EXCEPT BASE)
Pin Description Circuit
1 FUSED ACCESSORY DELAY RELAY OUTPUT F881 14PK
2 MASTER WINDOW SWITCH LEFT REAR (DOWN) Q611 14OR/GY
3 MASTER WINDOW SWITCH LEFT REAR (UP) Q411 14OR/WT
4 MASTER WINDOW SWITCH RIGHT REAR (DOWN) Q612 14OR/DB
5 WINDOW LOCK OUT SWITCH OUTPUT Q15 14OR/LB
6 GROUND Z912 18BK/OR
7 - -
8 MASTER WINDOW SWITCH RIGHT REAR (UP) Q412 14OR/LB
Component Location - 63
Connector:
Name : SWITCH-WINDOW/DOOR LOCK-DRIVER EXPRESS C2
Color : BLACK
# of pins : 6
Qualifier : (EXCEPT BASE)
Pin Description Circuit
1 DRIVER WINDOW DRIVER EXPRESS SWITCH MUX Q221 20GY/OR
2 PASSENGER WINDOW DRIVER EXPRESS SWITCH MUX Q222 20OR/GY
3 DRIVER DOOR LOCK SWITCH MUX G161 20VT/DG
4 DRIVER EXPRESS SWITCH RETURN Z421 20BK/BR
5 DRIVER DOOR LOCK SWITCH RETURN G167 20VT/LB
6 - -
Component Location - 63
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.