Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE2007MAGNUM SRT-8 V8-6.1L VIN 3REPAIR AND DIAGNOSISDIAGRAMSCONNECTOR VIEWSDIODEDIODE 1
2007 Dodge Magnum SRT-8 V8-6.1L VIN 3
Diode 1
2007 Dodge Magnum SRT-8 V8-6.1L VIN 3SECTION Diode 1
Component ID: 82
Component : DIODE 1
Connector:
Name : DIODE 1
Color :
# of pins : 2
Qualifier : (NAG1)
Power Distribution Center:
Pin Description Circuit
1 FUSED IGNITION SWITCH OUTPUT (RUN-START) F20 20PK/WT
2 IGNITION SWITCH OUTPUT (RUN-START) F941 20PK/BR
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.