Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE1993COLT L4-1468CC 1.5L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSIDLE SPEED MOTOR POSITION SENSORSERVICE AND REPAIR
1993 Dodge Colt L4-1468cc 1.5L SOHC
Idle Speed Motor Position Sensor: Service and Repair
1993 Dodge Colt L4-1468cc 1.5L SOHCSECTION Service and Repair
Note:
The Idle Motor Position Switch/Sensor is part of the Idle Air Control Motor/Servo, and must be replaced as a complete unit.
Procedure
1. Unplug both connectors from the Idle Air Control Motor and the Idle Motor Position Sensor.
2. Unbolt the Idle Air Control Motor from the Throttle Body and pull it straight out.
3. Reverse procedure for installation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.