Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE1993COLT L4-1468CC 1.5L SOHCREPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLANTILOCK BRAKES / TRACTION CONTROL SYSTEMSELECTRONIC BRAKE CONTROL MODULETESTING AND INSPECTION
1993 Dodge Colt L4-1468cc 1.5L SOHC
Electronic Brake Control Module: Testing and Inspection
1993 Dodge Colt L4-1468cc 1.5L SOHCSECTION Testing and Inspection
Fig. 32 ABS ECU Inspection Connector Connected Part 1 Of 2:
Fig. 32 ABS ECU Inspection Connector Connected Part 2 Of 2:
Fig. 33 ABS ECU Inspection Connector Disconnected:
Test the ABS ECU as follows:
1. Ensure battery voltage is normal.
2. With the ABS ECU connector connected, check voltage and continuity between each terminal and ground when ignition is the On position as shown.
3. With the ABS ECU connector disconnected, check resistance and continuity between each terminal on the harness side of the connector as shown.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.