Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE1991SHADOW L4-135 2.2L SOHCREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTENGINE CONTROL MODULE - ERRATIC IDLE SPEED
1991 Dodge Shadow L4-135 2.2L SOHC
Engine Control Module - Erratic Idle Speed
1991 Dodge Shadow L4-135 2.2L SOHCSECTION Engine Control Module - Erratic Idle Speed
91chrysler02
SUBJECT: Revised Engine Controller For Improved Automatic Idle Speed (AIS) Control
NO.: 18-02-91
GROUP: DRIVEABILITY
DATE: Feb. 25, 1991
MODELS:
1991 (AA) SPIRIT/ACCLAIM/LEBARON
(AC) DYNASTY/NEW YORKER/SALON
(AG) DAYTONA
(AJ) LEBARON COUPE/LEBARON CONVERTIBLE
(AP) SHADOW/SUNDANCE
(AS) CARAVAN/GRAND CARAVAN/CARAVAN C/V
VOYAGER/GRAND VOYAGER/TOWN & COUNTRY
SYMPTOM/CONDITION:
Subject vehicles that exhibit the need for improved Automatic Idle Speed control consistency likely require SMEC/SBEC replacement. The replacement engine controllers have been superseded to new controllers offering improved engine Automatic Idle Speed control. The following diagnosis and repair procedures will avoid unnecessary replacement of other components.
DIAGNOSIS:
Using a DRB II tester and the appropriate diagnostic procedure manual, verify that all vehicle engine systems are functioning as designed (no fault codes are present). If all systems are functioning correctly, proceed with the following replacement.
PARTS REQUIRED:
1 Engine Controller (SMEC/SBEC) for 1991 EFI Engines
AP Body, 2.2L, Federal, Automatic PN 4672464
AP Body, 2.2L, California, Automatic PN 4672472
AP Body, 2.2L, Federal, Manual PN 4672451
AP Body, 2.2L, California, Manual PN 4672449
AA/AG/AJ/AP Body, 2.5L, Federal, Automatic PN 4672447
AA/AG/AJ/AP Body, 2.5L, Calif., Automatic PN 4672445
AA/AG/AP Body, 2.5L, Federal, Manual PN 4672470
AA/AG/AP Body, 2.SL, Calif., Manual PN 4672466
AS Body, 2.5L, Federal, Automatic PN 4672478
AS Body, 2.5L, California, Automatic PN 4672476
AC Body, 2.5L, Federal, Automatic PN 4672482
1 Authorized Modification Label PN 4275086
REPAIR PROCEDURE:
This repair involves replacement of the original engine controller (SBEC) with a revised unit.
1. Replace the engine controller (SBEC) with the appropriate unit as called out in PARTS REQUIRED.
Figure 1:
2. Type the required information on the Authorized Modification Label, as illustrated in Figure 1, and attach near the VECI label.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No. 08-19-90-98 . . . . . . . . . . . . . . . . . 0.4 Hrs.
FAILURE CODE: AM - Authorized Modification
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.