Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE1991SHADOW L4-135 2.2L SOHCREPAIR AND DIAGNOSISSTARTING AND CHARGINGCHARGING SYSTEMTESTING AND INSPECTIONCOMPONENT TESTS AND GENERAL DIAGNOSTICSTROUBLESHOOTING HINTSHELP 1 - OPERATION OF THE DRBII FOR DIAGNOSTIC TESTINGHOW TO USE THE DRBII MENU
1991 Dodge Shadow L4-135 2.2L SOHC
How to Use the DRBII Menu
1991 Dodge Shadow L4-135 2.2L SOHCSECTION How to Use the DRBII Menu
From the DRB display:
---DRBII--
1) VEHICLES TESTED
2) HOW TO USE
3) CONFIGURE
4) SELECT SYSTEM
VEHICLES TESTED - The display will read:
VEHICLES SUPPORTED
1991 CHRYSLER
PLYMOUTH/DODGE
JEEP & EAGLE
HOW TO USE - A series of screens will be displayed about how to use the DRBII keys to move through the diagnostic program.
CONFIGURE - provides a menu of four DRBII functions, and enables you to view or change these functions. The functions are:
US/METRIC: enables you to have sensor, input, output, and other values displayed either in US standard units or in metric units.
KEY CLICK: enables you to choose to have either the green light illuminate or the beeper sound whenever a DRBII key is pressed.
KEY REPEAT: If the key repeat is ON, the down arrow or up arrow key will scroll the display repeatedly; if key repeat is OFF, the down arrow or up arrow key will scroll the display only one item at a time.
REMOTE DISPLAY: enables you to have what appears on the DRBII screen also displayed on another terminal screen.
When you select CONFIGURE, the display will read:
----CONFIGURE----
1) VIEW
2) CHANGE
VIEW: enables you to view the setting of any of the four DRBII functions under the CONFIGURE menu. If selected, the display will read:
US/METRIC US
KEY CLICK BEEPER
KEY REPEAT ON
REMOTE DISPLAY ON
CHANGE: enables you to change the setting of any of the four DRBII functions under the CONFIGURE menu. If selected, the display will read:
----CONFIGURE----
1) US/METRIC
2) KEY CLICK
3) KEY REPEAT
Press the down arrow twice to view the rest of the menu. The display will change to read as follows:
----CONFIGURE----
2) KEY CLICK
3) KEY REPEAT
4) REMOTE DISPLAY
Press the number of the function you want to change, or move the arrows to the item and press ENTER. The menu for each choice will read as follows:
----US/METRIC---- ----KEY CLICK----
1) BEEPER
1) US 2) GREEN LED
2) METRIC 3) NONE
4) BEEPER & LED
----KEY REPEAT---- ----REMOTE DISPLAY---
1) ON 1) ON
2) OFF 2) OFF
Press the number of the desired setting, or move the arrows to the desired setting and press ENTER.
---DRBII--
1) VEHICLES TESTED
2) HOW TO USE
3) CONFIGURE
4) SELECT SYSTEM
VEHICLES TESTED - The display will read:
VEHICLES SUPPORTED
1991 CHRYSLER
PLYMOUTH/DODGE
JEEP & EAGLE
HOW TO USE - A series of screens will be displayed about how to use the DRBII keys to move through the diagnostic program.
CONFIGURE - provides a menu of four DRBII functions, and enables you to view or change these functions. The functions are:
US/METRIC: enables you to have sensor, input, output, and other values displayed either in US standard units or in metric units.
KEY CLICK: enables you to choose to have either the green light illuminate or the beeper sound whenever a DRBII key is pressed.
KEY REPEAT: If the key repeat is ON, the down arrow or up arrow key will scroll the display repeatedly; if key repeat is OFF, the down arrow or up arrow key will scroll the display only one item at a time.
REMOTE DISPLAY: enables you to have what appears on the DRBII screen also displayed on another terminal screen.
When you select CONFIGURE, the display will read:
----CONFIGURE----
1) VIEW
2) CHANGE
VIEW: enables you to view the setting of any of the four DRBII functions under the CONFIGURE menu. If selected, the display will read:
US/METRIC US
KEY CLICK BEEPER
KEY REPEAT ON
REMOTE DISPLAY ON
CHANGE: enables you to change the setting of any of the four DRBII functions under the CONFIGURE menu. If selected, the display will read:
----CONFIGURE----
1) US/METRIC
2) KEY CLICK
3) KEY REPEAT
Press the down arrow twice to view the rest of the menu. The display will change to read as follows:
----CONFIGURE----
2) KEY CLICK
3) KEY REPEAT
4) REMOTE DISPLAY
Press the number of the function you want to change, or move the arrows to the item and press ENTER. The menu for each choice will read as follows:
----US/METRIC---- ----KEY CLICK----
1) BEEPER
1) US 2) GREEN LED
2) METRIC 3) NONE
4) BEEPER & LED
----KEY REPEAT---- ----REMOTE DISPLAY---
1) ON 1) ON
2) OFF 2) OFF
Press the number of the desired setting, or move the arrows to the desired setting and press ENTER.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.