Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE1991SHADOW L4-135 2.2L SOHCREPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SERVO CABLEADJUSTMENTS
1991 Dodge Shadow L4-135 2.2L SOHC
Cruise Control Servo Cable: Adjustments
1991 Dodge Shadow L4-135 2.2L SOHCSECTION Adjustments
Fig. 88 Speed Control Cable Adjustment. FWD:
Fig. 89 Cable Retaining Clip. FWD:
1. Clearance between throttle stud and cable clevis should be 1/16 inch.
2. Adjust cable by removing cable retaining clip at throttle bracket. Do not pull throttle away from curb idle.
3. Reinstall cable retaining clip.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.