Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY S, GASREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 27 (ELECTRONIC CONTROL MODULES (SERVICE INFORMATION))MODULE, COMPASSINSTALLATIONINSTALLATION
2013 Chrysler Town & Country S, Gas
Module, Compass: Installation: Installation
2013 Chrysler Town & Country S, GasSECTION Installation
WARNING: This page is about a different car, the 2012 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Remote Compass Module (RCM) (2) into the bracket on the upper side of the headliner (1).
- Install the RCM fasteners (4).
- Connect the electrical connector (3).
- Install the headliner assembly. Refer to HEADLINER, INSTALLATION .
- Connect the negative battery cable.
- Perform the Compass Variance Adjustment. Refer to MODULE, COMPASS, STANDARD PROCEDURE .
- Perform the Manual Compass Calibration. Refer to MODULE, COMPASS, STANDARD PROCEDURE .
- Verify proper compass operation.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.