Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY S, GASREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 231 (DTC INDEX)MODULE, PASSENGER DOOR (PDM), (DMFR)
2013 Chrysler Town & Country S, Gas
Module, Passenger Door (PDM), (DMFR)
2013 Chrysler Town & Country S, GasSECTION Module, Passenger Door (PDM), (DMFR)
WARNING: This page is about a different car, the 2013 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| B164E-11 | PASSENGER MIRROR SIGNAL LAMP CONTROL - CIRCUIT SHORT TO GROUND |
| B1676-11 | PASSENGER COURTESY LAMP CONTROL-CIRCUIT SHORT TO GROUND |
| B16A3-11 | PASSENGER WINDOW SWITCH BACKLIGHTING - CIRCUIT SHORT TO GROUND |
| B16A3-15 | PASSENGER WINDOW SWITCH BACKLIGHTING - CIRCUIT SHORT TO BATTERY OR OPEN |
| B1805-2A | PASSENGER DOOR LOCK/UNLOCK SWITCH - SIGNAL STUCK IN RANGE |
| B185E-11 | PASSENGER WINDOW CONTROL - CIRCUIT SHORT TO GROUND |
| B185E-13 | PASSENGER WINDOW CONTROL - CIRCUIT OPEN |
| B1862-11 | PASSENGER WINDOW POSITION SENSOR POWER SUPPLY - CIRCUIT SHORT TO GROUND |
| B1865-31 | PASSENGER WINDOW POSITION SENSOR - NO SIGNAL |
| B1910-2A | PASSENGER WINDOW SWITCH - SIGNAL STUCK IN RANGE |
| B1D11-11 | PASSENGER MIRROR POSITION SENSOR POWER SUPPLY - CIRCUIT SHORT TO GROUND |
| B1D14-11 | PASSENGER MIRROR VERTICAL POSITION SENSOR INPUT - CIRCUIT SHORT TO GROUND |
| B1D14-12 | PASSENGER MIRROR VERTICAL POSITION SENSOR INPUT - CIRCUIT SHORT TO BATTERY |
| B1D17-11 | PASSENGER MIRROR HORIZONTAL POSITION SENSOR INPUT - CIRCUIT SHORT TO GROUND |
| B1D17-12 | PASSENGER MIRROR HORIZONTAL POSITION SENSOR INPUT - CIRCUIT SHORT TO BATTERY |
| B1D2A-11 | PASSENGER MIRROR VERTICAL MOTOR CONTROL - CIRCUIT SHORT TO GROUND |
| B1D2E-11 | PASSENGER MIRROR HORIZONTAL MOTOR CONTROL - CIRCUIT SHORT TO GROUND |
| B1D36-11 | PASSENGER MIRROR HEATER CONTROL - CIRCUIT SHORT TO GROUND |
| B1D36-15 | PASSENGER MIRROR HEATER CONTROL - CIRCUIT SHORT TO BATTERY OR OPEN |
| B1E6A-11 | PASSENGER MIRROR FOLD CONTROL CIRCUIT SHORT TO GROUND |
| B1E6A-15 | PASSENGER MIRROR FOLD CONTROL CIRCUIT SHORT TO BATTERY OR OPEN |
| B210C-16 | BATTERY VOLTAGE INPUT - CIRCUIT VOLTAGE BELOW THRESHOLD |
| B210C-17 | BATTERY VOLTAGE INPUT - CIRCUIT VOLTAGE ABOVE THRESHOLD |
| B21A1-00 | ECU RESET/RECOVERY OCCURRED |
| B21DD-84 | SYSTEM VOLTAGE - SIGNAL BELOW ALLOWABLE RANGE |
| B21DD-85 | SYSTEM VOLTAGE - SIGNAL ABOVE ALLOWABLE RANGE |
| B2598-54 | DOOR MODULE FRONT LEFT - MISSING CALIBRATION |
| B2598-96 | DOOR MODULE FRONT LEFT - COMPONENT INTERNAL FAILURE |
| B2599-54 | DOOR MODULE FRONT RIGHT - MISSING CALIBRATION |
| B2599-96 | DOOR MODULE FRONT RIGHT - COMPONENT INTERNAL FAILURE |
| B282F-11 | PASSENGER PUDDLE LAMP CONTROL - CIRCUIT SHORT TO GROUND |
| B2831-11 | PASSENGER BLIND SPOT WARNING LIGHT CONTROL-CIRCUIT SHORT TO GROUND |
| B2831-15 | PASSENGER BLIND SPOT WARNING INDICATOR CONTROL-CIRCUIT SHORT TO BATTERY OR OPEN |
| U0010-00 | CAN INTERIOR BUS |
| U0141-00 | LOST COMMUNICATION WITH IPM (FCM/TIPM) |
| U0155-00 | LOST COMMUNICATION WITH CLUSTER/CCN |
| U0164-00 | LOST COMMUNICATION WITH HVAC CONTROL MODULE |
| U0203-00 | LOST COMMUNICATION WITH DOOR MODULE FRONT LEFT |
| U0204-00 | LOST COMMUNICATION WITH DOOR MODULE FRONT RIGHT |
| U0209-00 | LOST COMMUNICATION WITH MEMORY SEAT CONTROL MODULE |
| U0232-00 | LOST COMMUNICATION WITH BLIND SPOT DETECTION MODULE |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.