Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY S, GASREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 145 (ELECTRONIC CONTROL MODULES (SERVICE INFORMATION))MODULE, TRANSMISSION CONTROLOPERATION3.6L/6.4L GAS/3.0L DIESEL VEHICLESSHIFT SCHEDULES
2013 Chrysler Town & Country S, Gas
Shift Schedules
2013 Chrysler Town & Country S, GasSECTION Shift Schedules
WARNING: This page is about a different car, the 2013 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
The basic shift schedule includes up and downshifts for all five gears. The TCM adapts the shift program according to driving style, accelerator pedal position and deviation of vehicle speed. Influencing factors are:
- Road Conditions.
- Incline, Decline and Altitude.
- Trailer Operation, Loading.
- Engine Coolant Temperature.
- Cruise Control Operation.
- Sporty Driving Style.
- Low and High ATF Temperature.
| Upshift To: | 1-2 | 2-3 | 3-4 | 4-5 |
|---|---|---|---|---|
| Activated By Solenoid: | 1-2/4-5 | 2-3 | 3-4 | 1-2/4-5 |
| Shift Point (at 35.2% of throttle) | 17.8 km/h (11.6 mph) | 32.1 km/h (19.95 mph) | 67.5 km/h (41.94 mph) | 73.8 km/h (45.86 mph) |
| Downshift From: | 5-4 | 4-3 | 3-2 | 2-1 |
|---|---|---|---|---|
| Activated By Solenoid: | 1-2/4-5 | 3-4 | 2-3 | 1-2/4-5 |
| Shift Point | 55.7 km/h (34.61 mph) | 40.5 km/h (25.17 mph) | 24.4 km/h (15.16 mph) | 15.1 km/h (9.38 mph) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.