5 Volt Supplies

2013 Chrysler Town & Country S, GasSECTION 5 Volt Supplies
WARNING: This page is about a different car, the 2013 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Primary 5-volt supply:

  • supplies the required 5 volt power source to the Crankshaft Position (CKP) sensor.
  • supplies the required 5 volt power source to the Camshaft Position (CMP) sensor.
  • supplies a reference voltage for the Manifold Absolute Pressure (MAP) sensor.
  • supplies a reference voltage for the Throttle Position Sensor (TPS) sensor.

Secondary 5-volt supply:

  • supplies the required 5 volt power source to the oil pressure sensor.
  • supplies the required 5 volt power source for the Vehicle Speed Sensor (VSS) (if equipped).
  • supplies the 5 volt power source to the transmission pressure sensor (if equipped with an RE automatic transmission).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.