Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY S, GASREPAIR AND DIAGNOSIS (SINGLE PAGE)EXTERNAL PAGESDIFFERENT CARSECTION 199 ((DRIVETRAIN CONTROL MODULE (DTCM) - ELECTRICAL DIAGNOSTICS))
2013 Chrysler Town & Country S, Gas
Section 199 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics))
2013 Chrysler Town & Country S, GasSECTION Section 199 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics))
WARNING: This page is about a different car, the 2013 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Diagnostic Code Index
- DTC Troubleshooting
- C1403-11-Transfer Case Range Position Sensor - Circuit Short To Ground
- C1403-12-Transfer Case Range Position Sensor - Circuit Short To Battery
- C1403-8F-Transfer Case Range Position Sensor - Erratic
- C1403-92-Transfer Case Range Position Sensor - Performance Or Incorrect Operation
- C1406-11-Transfer Case Brake Control - Circuit Short To Ground
- C1406-12-Transfer Case Brake Control - Circuit Short To Battery
- C1406-92-Transfer Case Brake Control - Performance Or Incorrect Operation
- C140A-13-Transfer Case Motor Control - Circuit Open
- C140A-92-Transfer Case Motor Control - Performance Or Incorrect Operation
- C140E-00-Transfer Case Motor Blocked
- C1415-92- Transfer Case Motor "Current" - Performance Or Incorrect Operation
- C1438-00-Transfer Case Differential Clutch Worn
- C1444-00-Transfer Case Motor Overuse
- C1472-92-Transfer Case Clutch Control - Performance Or Incorrect Operation
- C1476-00-Transfer Case Clutch Position Out Of Range
- C1477-4B-Transfer Case Clutch - Over Temperature
- C2108-11-Drivetrain Supply Voltage - Circuit Short To Ground
- C2110-11-Sensor Supply 1 Voltage - Circuit Short To Ground
- C2110-12-Sensor Supply 1 Voltage - Circuit Short To Battery
- C2129-16-Battery Voltage - Circuit Voltage Below Threshold
- C2129-17-Battery Voltage - Circuit Voltage Above Threshold
- C212A-16-System Voltage - Circuit Voltage Below Threshold
- C212A-17-System Voltage - Circuit Voltage Above Threshold
- C2201-00-FDCM/DTCM Internal
- U0001-00-Can C Bus
- U0100-00-Lost Communication With Pcm
- U0101-00-Lost Communication With TCM
- U0121-00-Lost Communication With Anti-Lock Brake System (Abs) Control Module
- U0141-00-Lost Communication With IPM (FCM/TIPM)
- U0212-00-Lost Communication With SCM (SAS)
- U0401-00-Implausible Data Received From ECM/Pcm
- U0402-00-Implausible Data Received From TCM
- U0415-00-Implausible Data Received From Abs
- U0429-00-Implausible Data Received From SCM
- U0431-00-Implausible Data Received From IPM (FCM/TIPM)
- Standard Procedure
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.