Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2013TOWN & COUNTRY LIMITED, GAS/ETHANOLREPAIR AND DIAGNOSISSTEERINGSTEERING COLUMNSTEERING SYSTEMSPECIFICATIONSSPECIFICATIONS
2013 Chrysler Town & Country Limited, Gas/Ethanol
Steering System: Specifications: Specifications
2013 Chrysler Town & Country Limited, Gas/EthanolSECTION Specifications
POWER STEERING
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Gear Heat Shield Mounting Screws | 8 | 6 | 71 |
| Gear Mounting Bolts | 120 | 89 | - |
| Hose Tube Nut At Gear | 31 | 23 | 275 |
| Hose Tube Nut At Pump | 31 | 23 | 275 |
| Inner Tie Rod | 88 | 65 | - |
| Pump Mounting Bolts | 23 | 17 | 200 |
| Pump Mounting Bracket Bolts - 3.6L Engine | 28 | 21 | |
| Pressure Hose Routing Clamp Screws At Front Suspension Crossmember | 8 | - | 71 |
| Pressure/Return Hose Routing Clamp Nut At Engine - 2.8L Diesel Engine | 10 | - | 89 |
| Pressure/Return Hose Routing Clamp Screw At Engine - 2.8L Diesel Engine | 8 | - | 71 |
| Pressure/Return Hose Routing Clamp Screw At Front Suspension Crossmember - 2.8L Diesel Engine | 8 | - | 71 |
| Reservoir Mounting Screw | 12 | 9 | 105 |
| Return Hose Routing Cradle Clamp Screw At ABS Support Bracket | 8 | - | 71 |
| Tie Rod Steering Arm Nut | 75 | 55 | - |
| Tie Rod Jam Nut | 75 | 55 | - |
STEERING COLUMN
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Intermediate Shaft Coupling Pinch Bolt | 42 | 31 | - |
| Intermediate Shaft Extension Pinch Bolt | 42 | 31 | - |
| SCCM Mounting Screws | 3 | - | 27 |
| Steering Column Mounting Nuts | 28 | 21 | 250 |
| Steering Wheel Retaining Bolt | 50 | 37 | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.