Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2003300M V6-3.5L VIN MREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSTRANSMISSION AND DRIVETRAINSYSTEM SPECIFICATIONS
2003 Chrysler 300M V6-3.5L VIN M
System Specifications
2003 Chrysler 300M V6-3.5L VIN MSECTION System Specifications
Clutch Volume Index (CVI)
The L-R clutch volume is updated when doing a 2-1 or 3-1 coast down shift. The transmission temperature must be between 21-49 °C (70-120 °F). The clutch volume should be between 35 and 83.
The 2-4 clutch volume is updated when doing a 1-2 shift. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 20 and 77.
The OD clutch volume is updated when doing a 2-3 shift. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 40 and 150.
The UD clutch volume is updated when doing a 4-3 or 4-2 shift. The transmission temperature must be above 43 °C (110 °F). The clutch volume should be between 24 and 70.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.