Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER1999CIRRUS L4-2.4L VIN XREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULETESTING AND INSPECTIONSYMPTOM RELATED DIAGNOSTIC PROCEDURESPOWER DOOR LOCK SYSTEMALL DOORS FAIL TO LOCK AND UNLOCK FROM ONE SWITCH
1999 Chrysler Cirrus L4-2.4L VIN X
All Doors Fail to Lock and Unlock From One Switch
1999 Chrysler Cirrus L4-2.4L VIN XSECTION All Doors Fail to Lock and Unlock From One Switch
SYMPTOM
* ALL DOORS FAIL TO LOCK AND UNLOCK FROM ONE SWITCH
POSSIBLE CAUSES
- Door lock switch open
- Door lock switch fused B(+) CKT open
- Door lock switch output CKT open
- Door lock switch output voltage too high
- Door lock switch voltage too high
- Intermittent symptom selected
* ALL DOORS FAIL TO LOCK AND UNLOCK FROM ONE SWITCH
POSSIBLE CAUSES
- Door lock switch open
- Door lock switch fused B(+) CKT open
- Door lock switch output CKT open
- Door lock switch output voltage too high
- Door lock switch voltage too high
- Intermittent symptom selected
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.